Viking K-1900-8 Stainless Steel Hot-Line Telephone w/Keypad

The Viking K-1900-8 panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard (dumb) phone. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls.

The K-1900-8 housing consists of a heavy gauge stainless steel panel, a metal Touch Tone keypad, an armored cable, a heavy duty handset, and an all metal cradle.

The K-1900-8 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

Viking K-1900-8 Features:

- Auto dial 1 (up to 32 digits) programmable speed dial number
- Multi-number dialer mode adds 5 (up to 16 digits) speed dial numbers
- Touch tone or pulse dialing
- Non-volatile memory (no batteries required)
- Operates on analog PABX and key system extentions or analog Centrex and C.O. lines
- Programmable 6 digit security code
- Touch tone programmable
- Vandal resistant
- Programmable pre-dial pause
- Blocks fraudulent calls from hand held pocket dialers
- Limited toll restriction
- Hearing aid compatible amplified handset with sealed push button volume control

Technicals:

- Power: Telephone line powered (20V DC/18mA minimum)
- Dimensions: Overall - 5" WIDTH x 10" HEIGHT x 4" DEPTH
- Shipping Weight: 4 lbs
- Environmental: 32 Deg F to 90 Deg F with 5% to 95% non-condensing humidity
- Panel Material: .125 inch thick stainless steel
- Handset Cable Length: 33 Inches
- Mounting: Flush mounted
- Dial Speed: Touch Tone - Normal = 120ms on/off, Fast = 50ms, on/off; Pulse - Normal = 10 pps
- Connections: (1) RJ11 jack